CDC Aircraft Armament Systems Career Development Course, Set A (2W151A) Practice Test

These questions are part of the practice quiz. Start practicing

• What must be ensured to comply with DOD nuclear weapons system safety standards?
• What is the focus of TO routine reports?
• Which of the following is a type of failure due to electrostatic damage?
• Why is it important to use protective equipment in the workplace?
• What is the minimum distance equipment must be kept from explosives when it is not directly involved in an operation?
• What might happen if a TO routine report's recommendations are ignored?
• How do methods and procedures TOs differ from technical manuals?
• During which process is a TODCR typically finalized?
• Which inspection is performed just before flight?
• Which of the following examples is classified as a nonexpendable supply?
• What type of relay has two de-energized states?
• In the context of the reliability program, what defines a "critical" position?
• What component insulates the inner conductor of coaxial cable from the outer conductor?
• What code identifies the aircraft you are trained to work on?
• In what manner can expendable supplies be requisitioned?
• What is a crucial safety consideration when performing explosive operations?
• What staff function is responsible for managing the maintenance information system?
• In which class of fires can water be used as an effective extinguishing agent?
• What is the purpose of an equipment ground?
• What is the timeframe for submitting a supplemental report after a nuclear accident?
• Which deficiency type involves a problem related to the aircraft's structural design?
• Who has the final authority in establishing priorities for work within the maintenance squadron?
• What is defined as a liquid having a flashpoint below 100°F?
• In the Air Force training evaluation process, external information is gathered from which group?
• What is the desired ratio between the forward and reverse biases of a regular diode?
• What type of information is found in AFI 36-2101?
• What indicates that a rear-release contact retaining mechanism is unlocked during contact removal?
• What fire symbol must be marked on or near nonnuclear explosive locations?
• What essential role does an extraction tool serve in connector maintenance?
• Who is authorized to perform electrical repairs on aircraft?
• In aviation maintenance, what does a maintenance deficiency typically refer to?
• Which of the following is NOT a component of nuclear operation support?
• What is the definition of electrical current?
• What is the primary purpose of conducting an investigation after a nuclear safety mishap?
• Which of the following is NOT one of the nuclear safety standards?
• Why are fire division and chemical hazard symbols necessary?
• What should be analyzed when reviewing the impact of a TO deficiency?
• Which entity is responsible for deciding indoor secure storage requirements for aircraft weapons?
• Which level in the AFSC is known as the apprentice level?
• What type of supply is a chair classified as?
• In which work situations are goggles necessary?
• Which of the following is a sign of overheating in electronic components?
• Why is key control critical for safeguarding resources?
• What is the purpose of the report of survey?
• When is a DD Form 1574 and 1574-1 (gold) utilized?
• What type of items should be used for the repair and adjustment of electrical equipment?
• What should an individual do after detecting an incorrect procedure or unauthorized act?
• Why is it important for QA to monitor chafing?
• What is the effect of an anesthetic?
• Under what conditions do you assume custodial responsibility for Air Force equipment?
• What three components are required to form a complete circuit?
• What are the two functions provided by the index-type TO?
• Which resources are considered vulnerable to threats?
• What is the main purpose of the Air Force Training Evaluation Program?
• What should be installed when cleaning an electrical item to prevent energizing the item?
• What purpose does AFMC and other MAJCOMs serve with the data collected from the maintainer data collection system?
• What technique is recommended to prevent an explosive train?
• Who is responsible for appointing personnel to manage NWRM processes?
• What does "damage and destruction" refer to in the context of USAF resources?
• Under what condition can you interchange coaxial cables with different types of dielectric?
• Which type of cleaning solvent is permitted for cleaning electrical equipment?
• Using your back instead of legs while lifting can lead to what type of injury?
• Which of the following must be prevented according to nuclear safety standards?
• Which aspect is NOT a responsibility of the quality assurance role?
• Which three components are essential for an effective maintenance management system?
• What do you use to spot tie a protective boot?
• What defines a "vandalism threat" to USAF resources?
• From which supply unit should paper be requested?
• Which type of flashlight may be used in buildings containing explosive or flammable vapors?
• To whom is copy 2 of the 1348-1 distributed?
• What three elements must coexist to generate fire?
• What is the primary purpose of Technical Order (TO) emergency reports?
• What precaution is necessary to prevent accidental shock when working with power exceeding 300 volts?
• What does the 2W2X1 career field handle and store?
• Which safety equipment is vital for handling hazardous substances?
• How does the nuclear umbrella serve as a nonproliferation tool?
• What is the primary criterion for screening individuals out of the nuclear weapons program?
• Besides color coding, how can the contents of a compressed gas cylinder be determined?
• What type of information do the annunciators display?
• What is the primary purpose of the mobility staff function within the operations group?
• What does OPSEC aim to protect?
• What content would typically not be included in a technical order revision?
• How does effective management play a role in the protection of resources?
• What are job guides?
• When performing the fault isolation process, why do you follow along in the wiring diagrams?
• What is a secondary hazard associated with fiber optic systems?
• What does unscheduled maintenance primarily deal with?
• What does a normal set of measurements from a diode show?
• What device should be installed when cleaning an electrical item to prevent energizing it?
• What type of maintenance should follow the identification of chafing?
• When does the maintainer data collection system typically begin?
• What is a key strategy for safeguarding resources on the flight line?
• What two documents are used by the unit to determine their munitions forecast?
• Why is an action request (AR) not considered a replacement for a TODCR?
• When air cleaning, what is the maximum pressure you can use?
• What is the appropriate unit for requesting a replacement weapons timer?
• What do TO urgent reports recommend?
• What action can be taken to mitigate theft threats?
• Under what condition can highly flammable liquids be used for cleaning near explosives?
• Which method can be used to summon help for an electrical shock victim?
• Which of the following is a common force that can cause electrons to be released?
• What is an abbreviated TO used for?
• What is NOT a function of the index-type TO?
• What is the rank spread for a 9-level in the AFSC?
• Which AFI outlines the standards for personal protective equipment for supervisors and workers?
• What does OPLAN stand for in the context of munitions forecasting?
• How often should maintenance personnel review TO information to ensure efficiency?
• What is the primary purpose of the maintenance code displayed on the CITS?
• What happens after the shop initiates and completes the AFTO Form 350?
• What type of footwear is mandatory around heavy or falling objects?
• What key feature does the IMDS utilize to enhance user experience?
• What must be established if MSDS access is primarily through electronic methods?
• What is the correct supply unit for obtaining safety wire?
• Which of the following is NOT part of a visual inspection?
• What does proper mechanical operation of controls refer to?
• What organization is responsible for the distribution of a TODCR?
• What are two items that may require demilitarization?
• In relation to switches, what does the term "throw" refer to?
• What is the maximum allowed slack between cable support points?
• What is the key difference between fumes and mist?
• Who is responsible for establishing a balance between sortie production and maintenance capabilities?
• For which type of electrical incidents is current flow particularly critical in assessing danger?
• What is the primary function of a SPRAM account?
• Who must certify the modification of MNCL certified items?
• Which method is NOT used to standardize maintenance in an organization?
• What is the main purpose of a supplemental manual?
• Who is governed by DODR 5210.42-Regulation, AFMAN 10-3902?
• How do nuclear capabilities primarily deter aggression?
• What does custodial responsibility imply?
• Where is the starting point for a DR?
• What are the two types of grounding systems?
• Which MAJCOM is particularly focused on maintenance data from a logistics support perspective?
• Which of the following is not a way ALCs utilize maintenance data?
• When is an acceptance inspection performed?
• Class 1, Division 2 explosives are associated with what hazards?
• What is the purpose of a Phase inspection?
• Which action should NOT be taken during a visual inspection of electrical equipment?
• How does an irritant affect the body?
• What type of gloves are recommended for working with wooden crates?
• For ESD protection, what is the best practice in a repair environment?
• What are the two most common causes of electrical troubles?
• What is the primary hazard involved with fiber optics systems?
• Which of the following documents would you refer to for identifying modifications and malfunction history of end items?
• What guidance must the Air Force provide concerning nuclear weapons handling activities?
• When should you post the fire symbol?
• What should an OPSEC assessment cover?
• What precaution must be taken when troubleshooting a short to ground?
• What should workbench stools be made of?
• To what flight would 2W1X1 personnel normally be assigned within the maintenance squadron?
• What is the intention behind the maintenance collection system?
• What is one of the key aspects of ensuring maximum safety for nuclear operations?
• What are the recognized nuclear safety problem areas?
• What is the name of the user interface for the Integrated Maintenance Information System (IMIS)?
• Which of the following is NOT a type of ESDS component?
• What is a key component of systematically assessing OPSEC status?
• What classification of fire includes combustible metals such as magnesium and lithium?
• What is the intent of performing an electrical inspection?
• Which deficiency type focuses on issues related to software effectiveness?
• During initial setup of a new aircraft, which inspection is crucial?
• What term is used for electrostatic damage that shows symptoms only after a certain delay period?
• When does the loss of any resource typically occur?
• How can the forms application be accessed in IMIS?
• What defines expendable supplies?
• What is considered the central component of the Integrated Maintenance Data System?
• AFTO Form 244/245 is specifically used for which type of equipment?
• How is adherence to the two-person concept enforced in no-lone zones?
• To whom is copy 1 of the 1348-1 distributed?
• What is the primary purpose of electrical safety?
• When is a TODCR downloaded to a Program Management Activity (PMA)?
• What is the electrical charge of an electron?
• What must you do prior to performing electrical testing following an electronic equipment repair action?
• What is the most common material used to make resistors?
• Under what circumstances may a special inspection be required?
• What staff support function is responsible for coordinating munitions delivery priorities?
• Why is the supervisor given responsibility over equipment and supplies?
• Which items are classified as Class 1, Division 4?
• What is an effective method of cleaning debris from circuit devices?
• Why do people often hesitate to wear safety equipment?
• What is a primary cause of physical hazards found in an armament shop?
• What type of act is considered a "damage and destruction" threat?
• Which of the following materials is NOT a representative of Class D fires?
• Who prepares a report of survey?
• What constitutes a "theft threat" to USAF resources?
• Which documents are used to control a DIFM item through the repair cycle?
• What methods are useful for protecting munitions from threats?
• How might facilities be protected from potential threats?
• During what phases of an operation must OPSEC principles be applied?
• What is the minimum distance required for refueling support equipment near explosives?
• What is a key characteristic of methods and procedures TOs?
• What is the primary objective of the repair cycle asset and control system?
• Which of the following best describes the role of economy of operation in equipment management?
• What charge does a proton carry?
• Which form is designed for documenting equipment discrepancies that are not due to operational issues?
• Which career field is responsible for the disposal of unserviceable excess ammunition?
• What term refers to maintaining a work area in a state that facilitates the completion of work?
• What should be avoided to prevent chafing in electrical systems?
• What is the longest time after discovering a loss that a report of survey must be initiated?
• What type of contaminants can be classified as mechanical?
• Who should ideally be designated as a property custodian?
• Who is authorized to perform electrical repairs?
• When using compressed air for cleaning, what is the maximum pressure you can use?
• When considering submitting a legacy TO improvement report, what is a key factor?
• What types of RF connectors are used on coaxial cables?
• What is meant by the term "nuclear weapons system"?
• Which system is designed to handle material management and logistical support requirements?
• What does performing an electrical inspection consist of?
• Which group identifies a supplemental manual or indicates the sequence number of specific TO data?
• Which type of TO carries out modification and modernization programs?
• What is an effective way to protect equipment and supplies from threats?
• Who is responsible for ensuring the enforcement of the two-person concept?
• What material is NOT advisable for storage of explosive items?
• What is considered the best method to protect firearms from threats?
• What must the analysis of determining explosive limits include?
• What contact information is required on MSDS labels for obtaining more information on hazardous chemicals?
• How can the Training Business Area (TBA) be accessed by a user?
• Which types of inspections are included in the supplemental inspection area?
• What inspection concept is implemented during a Thruflight inspection?
• Which are the three general types of electrical troubles primarily encountered?
• What are the two channels required for upgrade to the 5-level in the AFSC?
• What type of hazard do Class 1, Division 1 explosives produce?
• What is a primary responsibility of the Maintenance Operations Center (MOC)?
• What flagword indicates the crash of an aircraft loaded with a nuclear weapon?
• What is the overall function of the Integrated Maintenance Data System (IMDS)?
• Why is it important to prevent spontaneous activations of nuclear systems?
• Which type of TCTO requires minimal planning and immediate implementation?
• Who is responsible for assigning the initial security rating of the TODCR?
• Which ESDS component type is likely to include semiconductors?
• What are the primary hazards when handling explosives?
• How much current is considered to be harmless but still felt during a shock?
• Which factor is essential in rendering an ally's nuclear arsenal redundant?
• How can insulators be characterized?
• What is the first action taken when a demand is made on base supply for a reparable item?
• What is the recommended technique for lifting heavy objects safely?
• Which of the following is NOT a category of skin contaminants?
• What type of inspection is categorized as a Minor inspection?
• What is the overall purpose of the master nuclear certification listing?
• What is typically used to extinguish a Class B fire?
• Which type of TO is presented in the form of tapes and cards?
• What must be done with tools and equipment after a maintenance operation?
• What is a critical procedure to follow when repairing an ESD unit?
• What type of inspection is the Basic postflight inspection classified as?
• Who is responsible for the care of equipment used in Air Force jobs?
• What does the "5-level" designation refer to in the AFSC?
• What type of munition is assigned to the very highest risk category?
• What type of information do technical manuals provide?
• What items can you use for repair and adjustment of electrical items?
• Which item would not typically be considered an expendable supply?
• Which type of maintenance focuses on preventive actions to avoid failures?
• What skill level operates handling and loading equipment and mates munitions with aircraft release and launch systems?
• What MAJCOM performs depot-level maintenance of weapons system components?
• Which skill level establishes and evaluates performance and training standards, maintenance controls, and procedures?
• Which areas are classified as no-lone zones?
• When must a preliminary report be submitted after a nuclear accident?
• Which inspection concept is used for the Hourly postflight inspection?
• Bonding is different from grounding in what specific respect?
• When is it permissible to splice coaxial cables?
• When is it more suitable to wear a face shield instead of goggles?
• What happens to a circuit if current flow exceeds the maximum limit?
• What is the first rule to follow when planning an explosive operation?
• What is a critical advantage of a well-structured maintenance management system?
• At what angle do you keep an insertion or extraction tool to the grommet face of the connector?
• What is the primary purpose of the documentation element of plans, scheduling, and documentation?
• Which type of gloves should be worn when handling hazardous chemicals?
• In which group will the majority of 2W1X1 personnel be assigned?
• How does a maintainer typically interact with the IMDS system?
• When is a DD Form 1577 and 1577-1 (red) utilized?
• Which form is used to document inspection items, inspection intervals, and the next inspection due?
• What is a potential risk if there's no back-up system for MSDS access?
• What units do the rules surrounding the MNCL apply to?
• What additional head protection is typically used alongside goggles or a face shield?
• What are the responsibilities of the equipment management section?
• What type of deficiencies includes issues related to the manufacturing quality?
• What distinguishes an open circuit from a short circuit?
• What does the term 'currency of combat related operations plans' refer to?
• What identifies repair cycle assets?
• What component of the B-1 aircraft identifies the faults for troubleshooting?
• What skill level determines the probable effect of modifications on future maintenance and operational problems?
• Why is the establishment of a clear workplace signage system important?
• Which inspection concept is associated with a Preflight inspection?
• What are the two most common causes of chafing in aircraft systems?
• What is the role of group 6 in technical orders?
• When is a TO considered a preliminary TO?
• What is an indicator of chafing in wiring systems?
• What are Combat Armament Support Teams (CASTs) responsible for?
• What are the two main categories of positions under the nuclear weapons PRP?
• Which type of failure is described as not being able to find a malfunction despite multiple tests?
• What are the three categories that can be used to classify sources of information that may provide the enemy with advance warning?
• What is a significant role of the Group Commander in aircraft maintenance?
• What is one potential benefit of reporting a legacy TO issue?
• What are the two common components shared by all switches?
• What type of cleaning solvent is authorized for cleaning electrical equipment?
• What is the primary function of an electrolyte in a battery?
• What does the complete rounds code identify?
• What is the primary purpose of the maintenance management system?
• Which MAJCOM installs ammunition on search and rescue helicopters?
• What method is utilized to conduct inventories on aircraft that contain NWRM installed assets?
• What indicates the direction of current flow in a conductor?
• To which risk category are bomb fuzes typically assigned?
• Fifty caliber and larger ammunition with explosive-filled projectiles are assigned to which risk category?
• Which clothing materials should be avoided due to high static electricity production?
• What elements normally make up the weapons flight of a flying/bomb squadron?
• What do the risk categories of our resources describe?
• Which entity has the final decision on the distribution of a TODCR?
• Which type of deficiency is caused by errors in workmanship?
• Which mode of the 8025A is particularly useful when monitoring test leads after positioning?
• What is the recommended tool for measuring the capacity of electrical circuits?
• Why are forward-firing munitions considered particularly hazardous?
• What does the temperature coefficient measure?
• What is a key component of good housekeeping in a work area?
• What flagword is used to indicate an attempted theft of a nuclear weapon?
• What materials should workbench stools be made from?
• What document is used by the custodian to track assigned EAID property?
• What is stated about paper backups within the TBA system?
• What is the primary effect of inhaling a gas?
• What is the purpose of the USAF Deficiency Reporting and Investigating System?
• What occurs in an object that has a static charge?
• When checking a diode with an ohmmeter, what is indicated by 2 high-resistance measurements?
• What is the most effective common method for tool control?
• Who should be consulted to identify the appropriate safety equipment for a specific job?
• What is the primary factor in evaluating the potential severity of an electrical shock?
• How can the charge of a neutron be described?
• What principle does a generator operate on?
• What distinguishes a gas from a vapor?
• Which aspect is crucial for maintaining coaxial cables?
• What constitutes an appendix in technical documentation?
• What DOD hazard class includes ammunition and explosives?
• What does the left-hand rule help to determine?
• What is the purpose of the Federal Hazard Communication Training Program?
• If you are using the job guide and a task fails, what do you do with the fault code for that task?
• Why is it important to determine the sensitivity level of electronic components?
• What is the main purpose of the federal supply classification system?
• What critical process must occur if there are discrepancies in munitions accounting?
• Why are supplements to basic publications issued?
• What do you do to all unused holes in a connector?
• How many types of deficiencies are there in total?
• What term is used to identify a circuit that is switched by a relay?
• Who generates a Technical Order Data Change Request (TODCR)?
• What defines a Class A fire?
• Which information is generally unavailable in abbreviated TOs?
• As the hazard associated with each division of explosives decreases, what happens to the fire symbol number?
• Why is documenting deficiencies important in the OPSEC program?
• What does "critical component" refer to in nuclear weapon systems?
• Why is it essential to store explosive items on dunnage?
• What should be included in the development of OPSEC procedures?
• When troubleshooting a circuit, what does a good circuit breaker normally indicate?
• Which risk category is an M-240D machine gun assigned to?
• What flagword is associated with a damaged fin on a nuclear weapon?
• What is defined as the constant interaction between wiring system components?
• What is the most common method of technical order data (TOD) selection?
• What does the term "flash point" refer to?
• Which option describes record TCTOs?
• In the context of nuclear weapons, what does "tamper" mean?
• What is the most common form of directives used in maintenance operations?
• What is the inspection concept for a Periodic inspection?
• What are the major objectives of the OPSEC program?
• What can indicate the presence of voltage in a circuit?
• What primary function does the PMA serve in relation to maintenance?
• What is the rank level associated with an unskilled 1-level Air Force Specialty Code (AFSC)?
• Which documents are crucial for determining munitions inventory accuracy?
• What does the "two-person concept" emphasize in nuclear areas?
• Why is it important for both the flight line and ammo to agree on munitions accounting?
• How is internal evaluation information for training programs obtained?
• Which individual is crucial in the operational readiness of aircraft?
• Where should replacement nuts and bolts be sourced from?
• AFTO Form 244 is primarily used for tracking what aspect of equipment?
• Who is responsible for the maintenance on assigned aircraft?
• Why does the Air Force utilize condition and status tags?
• What is a generator primarily used for?
• Which procedures are essential for preventing chafing?
• What must you do prior to performing electrical testing?
• When are changes to technical orders typically issued?
• Where should one obtain printer cartridges?
• In what conditions should explosive items be stored?
• What is the sensitivity range for Level 1 ESD components?
• Which of the following is NOT one of the general classes of fires?
• Who is responsible for ensuring accurate records of supply transactions?
• What should be maximized according to the responsibilities of the equipment management section?
• What type of information is typically found on a DD Form 1574?
• What action should be taken upon discovering a safety deficiency?
• What is usually the first step in troubleshooting?
• Under what inspection concepts are Air Force aircraft and weapons systems inspected?
• Which document authorizes the equipment used by an organization?
• What publication contains information on the proper configuration of munitions trailers?
• What are the three basic parts of a battery?
• Which of the following is essential for handling explosives effectively?
• Which of the following assists in identifying the contents of a compressed gas cylinder?
• What inspection concept is primarily used in the End-of-runway inspection?
• How is a National Stock Number (NSN) composed?
• What are the typical power ratings for carbon-composition resistors?
• Which of the following factors does NOT affect when a periodic inspection might become due?
• Which sensitivity range corresponds to Level 2 ESD components?
• What are unique item identifiers used for in data management?
• What must you remember when you begin the fault finding process?
• What components make up the nuclear munitions enterprise?
• To whom are copies 3 and 4 of the 1348-1 distributed?
• What is one of the main reasons for reporting nuclear safety mishaps?
• How are changes identified in technical orders?
• What are the four distinct types of Interactive Electronic Technical Manual (IETM) tasks?
• Why is proper ventilation important during explosive handling?
• What does Quality Assurance (QA) primarily monitor?
• Where do Class C fires commonly occur?
• To what risk categories are our resources typically assigned?
• Which of the following is a key responsibility of the 2W1X1 personnel?
• Which one of these is NOT listed as an ESDS component?
• Which rank corresponds to a 7-level technician within the AFSC?
• Which MAJCOM is responsible for loading munitions on fighter aircraft?
• Which role primarily focuses on documenting maintenance actions and historical data?
• What information does the master nuclear certification listing provide?
• How does the maintenance collection system support management at the base level?
• What issue can a loose connection lead to over time?
• Which MAJCOM is tasked with loading missiles on fighter aircraft for test and evaluation missions?
• Which report is aimed at correcting hazardous conditions that are not emergencies?
• Which factor does NOT influence the velocity and distance of explosive fragments?
• What are the two modes of operation mentioned for the device?
• Which device is more commonly used in circuits, fuses or circuit breakers, and why?
• In terms of component sensitivity, what defines Level 1 components?
• Which term describes missing or damaged connector contacts?
• What is the deadline to report a safety deficiency after it is discovered?
• What action must be taken if a discrepancy exists with any element of item identification in the MNCL?
• What are the primary threats to USAF resources?
• Which inspection concept refers to the Home station check?
• What rule must be followed regarding clothing during explosive operations?
• How are Interactive Electronic Technical Manuals (IETMs) accessed?
• Why do circuit designers use resistors?
• What is the purpose of a DD Form 1575 and 1575-1 (brown)?
• What precaution is necessary when testing power sources exceeding 300 V?
• What is one type of TCTO that requires immediate action?
• What is the main concern when troubleshooting electrical systems?
• What is the purpose of seals used on nuclear weapon system components?
• What is involved in braid repair?
• How are directional signs typically color-coded?
• Which Technical Order (TO) covers material deficiency reporting?
• What defines a qualified technician for electrical repairs?
• Which technique can reduce the risk of current affecting your heart or brain when working on live circuits?
• Under what circumstances are DD Form 1577-2 and 1577-3 (green) used?
• What is a vital factor in the installation of wiring harnesses?
• What type of relay is typically sealed in a glass capsule?
• What occurs in a fuse when it "blows"?
• What is the last step in the repair cycle process for a reparable item?
• What 2 types of contact releases are provided for crimped contacts?
• When installing a new protective boot, how do you position it after it shrinks?
• What action is taken when an item is certified for nuclear safety?
• Where are wire-wound resistors commonly used?
• What is considered the best basic defense against air contaminants?
• How far do you insert a stripped wire into a contact before you crimp it?
• What is a potential consequence of not addressing deficiencies highlighted in a TO emergency report?
• When is a final report after an investigation required to be submitted?
• Who advises the squadron maintenance officer on factors affecting PRP status?
• Which of the following poses a danger by inflaming respiratory pathways?
• What authority holds military members accountable for public property?
• What is the unit of measurement for electrical pressure?
• What potential hazard does an asphyxiant present in the workplace?
• Which of the following defines preventive maintenance?
• What will prevent accidents when time constraints and emergencies cause normally careful individuals to become careless?
• What concept is applied when verifying seals on nuclear components?
• Which of the following is not a function of ALCs in relation to maintenance data?
• What kind of information can you find on an AFTO Form 95?
• What defines a no-lone zone?
• What is a key feature of the construction of a rotary switch?
• What describes a revision in the context of technical documents?
• What is the definition of magnetism?
• What are the two types of nuclear system faults?
• What skill level is responsible for boresighting and performing after-firing inspections of aircraft guns?
• What is the purpose of the indicating band on the working end of an insertion tool?
• How should explosives be transported to ensure safety?
• What type of failure is characterized by an occasional malfunction that cannot be consistently reproduced?
• Who is responsible for authorizing smoking areas in an explosive area?
• What skill level is responsible for the loading and unloading of munitions?
• Which of the following is a key role of quality assurance?
• What element connects the maintenance scheduling with historical tracking of actions?
• What type of inspection determines if the aircraft or weapons system is suitable for another mission?
• What danger does a poison pose to the body?
• Which conditions are known to make all voltages potentially dangerous?
• What must be initiated and attached to the reparable item after it is delivered by supply?
• What is the primary intent of performing an electrical inspection?
• What are the two main categories of maintenance?
• What monetary and military values should we consider our resources to have?
• Which skill level examines aircraft guns for defects?
• What is an effective method of cleaning debris from circuit devices?
• Which class of fires primarily involves flammable gases and liquids?
• What is the most obvious form of chafing?
• Which section reviews a TODCR related to munitions loading for technical validity?
• What tasks are required upon completion of a maintenance operation?
• What is the main objective of a phase inspection?
• What amount of current is usually very painful and can lead to unconsciousness?
• What does the CFETP provide for Air Force personnel?
• Which MAJCOM is responsible for loading munitions on bomber aircraft?
• What is the role of a "controlled" position in the reliability program?
• What are the two types of fuses?
• Which type of circuit component is most effective in controlling current flow?
• What type of maintenance includes planned or programmed operations?
• Which situation typically leads to an open circuit?
• What type of discrepancy is excluded from being documented in the AFTO Form 781A?
• What type of problem is typically indicated by burnt wiring?
• Which AF Form is typically used for the issue of supplies?
• What should you do if you cannot shut off power while assisting an electrical shock victim?
• What does EAID stand for?
• When does the Personnel Reliability Program (PRP) typically apply?